Are you a user of windows 10 and While using or updating your windows, you may face the blue screen of a desktop or getting driver power state failure windows 10? If yes and want to solve this problem then you are at right place, my friends.
In this article we will discuss on how to fix blue screen driver power state failure, what is the driver_power_state_failure windows 10, what are the reasons behind it etc. so keep reading and solve your problem of BSOD.
- Critical Process Died
- Problem With Wireless Adapter or Access Point on Windows 10
- BAD_SYSTEM_CONFIG_INFO in Windows 10
What Is The Driver Power Failure Error?
Table Of Contents
- 1 What Is The Driver Power Failure Error?
- 2 How To Fix Windows 10 Driver Power State Failure?
- 3 Method 1: Uninstall the drivers with a problem
- 4 Method 2: Update the drivers
- 5 Method 3: System Restore
- 6 Method 4: Change your Power settings
- 7 Method 5: Change power plan setting
- 8 Method 6: Disable or remove your antivirus software
- 9 Method 7: Revert your graphics card drivers to the older version
- 10 Method 8 – Change Power settings in Nvidia Control Panel
- 11 Method 9: Upgrade the BIOS to Fix Driver Power State Failure Error
The Driver Power State Failure error occurs when you are using your computer, or you are upgrading the operating system for Windows 10. The causes behind this problems may be different, but the one that can say about it is that issues affected your drivers always cause it. There might be uncertainties that you are using the drivers that either outdated or incompatible. So this point will give you an idea to fix whatever is wrong.
But even if you may not get the issue, don’t worry. We are here to help you in this, too. So first make sure you are getting and dealing with the right problem. That’s why first check that you have to get the following message:
Your PC ran into a problem and needed to restart. We’re just collecting some error info, and then we’ll restart for you. If you’d like to know more, you can search online later for this error: DRIVER_POWER_STATE_FAILURE.
If it displays the same message, then go to the solution listed below.
How To Fix Windows 10 Driver Power State Failure?
Method 1: Uninstall the drivers with a problem
When you get driver power state failure error, then enter Safe Mode of pc and reboot it. Check for the driver status in Device Manager. If it shows yellow mark next to a device, you can uninstall that device. But first, enter safe mode. If you know how to enter safe mode, it is good but if you don’t know then follow the first case given below.
Case 1. When you cannot boot Windows 10 successfully
Case 2. When you can boot Windows successfully
If you cannot boot Windows successfully, please follow steps below to enter safe mode:
Step 1: First Reboot your PC.
Step 2: After rebooting the PC, the system prepares automatic repair. After that, startup repair window will appear. Click on the advanced options; then the system will direct the display to Windows Recovery environment.
Step 3: If the startup repair window doesn’t appear, then restart Windows again.
Step 4: In Windows Recovery environment (RE), click on the Troubleshoot option.
Step 5: Next, click on advanced options.
Step 6: Now, Click on Startup Settings.
Step 7: After that click on Restart.
Step 8: On your keyboard, press key number 4 to enter Safe Mode.
After, booting windows successfully, follow the step to enter safe mode:
#1. Press windows key from your keyboard and R at the same time to invoke a Run command.
#2. Next, type msconfig and click the OK tab.
#3. From system configuration click on Boot tab. Under the Boot options, check Safe boot and click ok.
#4. So after entering safe mode and Click Restart.
Secondly, uninstall the drivers with a problem:
Once you enter the safe mode, follow the steps below to uninstall the problem drivers.
Step 1: Press windows key and R together to invoke a Run command.
Step 2: Now in run command, type devmgmt.msc and click the OK tab.
Step 3: Next, enlarge the category and find the device with a yellow mark and right click on the device.
Step 4: Select the uninstall option from a list.
Step 5: Now, repeat all the steps to uninstall all drives with yellow mark and reboot your PC.
IMPORTANT NOTE: If you enter safe mode in Windows Normal Mode, uncheck Safe boot after you uninstall the drivers. Then reboot your PC.
Method 2: Update the drivers
If the above step does not resolve a problem, then follow this method of update drivers. First of all, check all your devices have the right updated drivers. If it is not updated correctly, then update it. You can update it manually, and if you are not able to update drivers manually, then you can update them automatically using Driver Easy.
You can update your drivers automatically with Driver easy either the Pro version or FREE version. But with the Pro version, it takes just two clicks for an update of all drivers, and you get full support. To update driver follow the steps given below:
Step 1: Download and install Driver Easy.
Step 2: Now open the software and run it by click on the Scan Now tab. Driver Easy will scan your computer automatically and detect if there is any problem in the drivers.
Step 3: Next, click on the Update button near to any selected device or select update all tab which is given at the bottom of the page to download and install the correct version of its driver automatically.
Method 3: System Restore
System Restore can do via restoring the previous version of your Windows OS, and it may fix driver power state failure in windows 10. To fix the problem follow the steps given below:
Step 1: First Right-click the “My Computer” and go to the Property.
Step 2: Go to the System Protection. Inside it choose the System Restore.
Step 3: After selecting it, click on Next and wait for the system to be restored. And all set!
Now check your problem solved or not.
Method 4: Change your Power settings
Sometimes driver state power failure can appear due to power settings. So follow the steps given below:
Step 1: Press Windows Key and S together to open control panel. Select control panel from the list.
Step 2: From the control panel find power option from it.
Step 3: Select Choose what the power button does option.
Step 4: Next, click on Change settings that are currently an unavailable option.
Step 5: Deactivate Turn of fast startup (recommended), Sleep and Hibernate options. Click on Save changes tab.
Method 5: Change power plan setting
Some users are told that change in power plan setting can also sometimes solve the problem. To do that, follow these steps:
Step 1: From the control panel select the Power options. Find your currently selected plan and click on Change plan settings.
Step 2: Next, click on Change advanced power settings option.
Step 3: Now you will see a list of all settings. Open the Sleep section and Sleep and Hibernation option set to Never. In Power buttons and lid option, set to Do nothing and click on Apply and OK to save changes.
Method 6: Disable or remove your antivirus software
Antivirus software for PC is essential, but seldom your antivirus can interfere with Windows and lead to Driver Power State Failure error to occur. To solve this problem, temporarily disable your antivirus software and check if that solves the issue. If not, you might have to uninstall your antivirus software completely.
Method 7: Revert your graphics card drivers to the older version
Sometimes windows 10 driver power state failure error can appear due to your graphics card drivers. To solve this problem, it is suggested to roll back to the older driver. You can do it by following these steps:
Step 1: Open Device Manager.
Step 2: Go to the Display adapters section and double-click on your graphics card.
Step 3: It will open window Properties, go to the Driver tab and click on Roll Back Driver button. Wait until the process to finish.
If Roll Back option is not available, then uninstall your graphics card driver from Device Manager. After uninstalling the graphics card, visit your graphics card manufacturer’s website and download the older version of the driver. Install it and check your problem is solved it or not.
Method 8 – Change Power settings in Nvidia Control Panel
As per some users, Driver Power State Failure problem can cause due to your power settings. This problem appears most of the time while using Nvidia graphics, so to fix it by the steps given below:
Step 1: Open Nvidia Control Panel.
Step 2: From the left side, select Manage 3D settings.
Step 3: Inside this option, select dedicated graphics card as preferred graphics processor from the right side. In the list of setting, find Power management mode and select Prefer maximum performance.
Step 4: Save changes and check your problem is solved or not.
Method 9: Upgrade the BIOS to Fix Driver Power State Failure Error
You could find the BIOS information on your device and then search for the BIOS updates on the manufacturer’s support website which provides the download.
It is all about how to fix driver power state failure in windows 10.we hope one of this method will help you to solve this problem. If you also have any other solution to fix this error, then you can comment them in the comment section. If you also have any doubts then also leave your comment. Our expert will surely reply. Thank you!
Some Useful Article: